Through hole manufacturing

Circuit Break Podcast #281

Through Hole Manufacturing

Related Topics
Tracing a Path for PCB Design Automation with Sergiy Nesterenko

Sergiy Nestorenko, founder of Quilter and former SpaceX engineer, discusses revolutionizing PCB design automation.

Dr. Duncan Haldane from JITX on Automating Circuit Design

Dr. Haldane on his background, the problems JITX is trying to resolve, & new auto-router plans. What's the deal with the "hyper-aggressive pogo-stick"?

The Danger Pool

The CHIPS act is driving chip manufacturers like Texas Instruments, TSMC, and Intel to expand in the US, but there's a shortage of engineering manpower.

Other Resources

Circuit Break Podcast
Blog
eBooks & Guides
Webinars
Videos
Case Studies
Tour MacroFab's ITAR-Compliant Facility

June 17, 2021, Episode #281

Through hole assembly for PCBs might be great for low volume prototypes but how do you scale up that process? What design considerations are needed?

Through Hole Manufacturing

  • Processes
    • Hand Soldering
    • Soldering “robot”
    • Wave soldering
      • Design Criteria
      • Pallets
    • Selective soldering
      • Design Criteria
      • Keepouts
  • Lead Forming
    • Pre purchase?
    • Forming with a die?
    • Using hand tools?
  • PCB design
    • Holes
    • Non circular?
    • Annular rings
    • IPC stuff
      • IPC-2221 Generic Standard on Printed Board Design
      • IPC-2222 Sectional Design Standard for Rigid Organic Printed Boards
      • IPC-2223 Sectional Design Standard for Flexible/Rigid-Flexible Printed Boards
      • IPC-7351 Generic Requirements for Surface Mount Design and Land Pattern Standard
        • Performance Classification (1,2,3)
        • Producibility Levels (A,B,C)
        • Land Pattern Determination (Density level A,B,C)

About the Hosts

Parker Dillmann
  Parker Dillmann

Parker is an Electrical Engineer with backgrounds in Embedded System Design and Digital Signal Processing. He got his start in 2005 by hacking Nintendo consoles into portable gaming units. The following year he designed and produced an Atari 2600 video mod to allow the Atari to display a crisp, RF fuzz free picture on newer TVs. Over a thousand Atari video mods where produced by Parker from 2006 to 2011 and the mod is still made by other enthusiasts in the Atari community.

In 2006, Parker enrolled at The University of Texas at Austin as a Petroleum Engineer. After realizing electronics was his passion he switched majors in 2007 to Electrical and Computer Engineering. Following his previous background in making the Atari 2600 video mod, Parker decided to take more board layout classes and circuit design classes. Other areas of study include robotics, microcontroller theory and design, FPGA development with VHDL and Verilog, and image and signal processing with DSPs. In 2010, Parker won a Ti sponsored Launchpad programming and design contest that was held by the IEEE CS chapter at the University. Parker graduated with a BS in Electrical and Computer Engineering in the Spring of 2012.

In the Summer of 2012, Parker was hired on as an Electrical Engineer at Dynamic Perception to design and prototype new electronic products. Here, Parker learned about full product development cycles and honed his board layout skills. Seeing the difficulties in managing operations and FCC/CE compliance testing, Parker thought there had to be a better way for small electronic companies to get their product out in customer's hands.

Parker also runs the blog, longhornengineer.com, where he posts his personal projects, technical guides, and appnotes about board layout design and components.

Stephen Kraig
  Stephen Kraig

Stephen Kraig is a component engineer working in the aerospace industry. He has applied his electrical engineering knowledge in a variety of contexts previously, including oil and gas, contract manufacturing, audio electronic repair, and synthesizer design. A graduate of Texas A&M, Stephen has lived his adult life in the Houston, TX, and Denver, CO, areas.

Stephen has never said no to a project. From building guitar amps (starting when he was 17) to designing and building his own CNC table to fine-tuning the mineral composition of the water he uses to brew beer, he thrives on testing, experimentation, and problem-solving. Tune into the podcast to learn more about the wacky stuff Stephen gets up to.

Special thanks to whixr over at Tymkrs for the intro and outro!

Related Podcasts

MEP FI 406

Dr. Duncan Haldane from JITX on Automating Circuit Design

Dr. Haldane on his background, the problems JITX is trying to resolve, & new auto-router plans. What's the deal with the "hyper-aggressive pogo-stick"?

Danger pool

The Danger Pool

The CHIPS act is driving chip manufacturers like Texas Instruments, TSMC, and Intel to expand in the US, but there's a shortage of engineering manpower.

Breadboarding for success

Breadboarding for Success

This week we are talking about Breadboards. Is breadboarding a circuit or design still applicable in today's SMT component dominated world?

The pcb plague

The PCB Plague

Ever have PCBs that solder just will not wet and solder to? You probably thought it was improper soldering technique but that was probably not it!

Datasheet lore

Datasheet Lore

What lore have you discovered in component datasheets? On this episode, Parker talks about how he picks electrical components and risk management.

CB FI 421

Tracing a Path for PCB Design Automation with Sergiy Nesterenko

Sergiy Nestorenko, founder of Quilter and former SpaceX engineer, discusses revolutionizing PCB design automation.