You are here:
With the MacroFab platform, you can interactively define the entire build and validation procedure for complex products and system integration, get quotes for final assembly, and place orders right in your browser. This article walks through the process of defining build-box instructions and best practices for stress-free assembly.
Writing out clear assembly instructions is important to ensure our assembly technicians properly build your products the same every time.
To get started, use the Assembly Instructions tab. Then click the line adding some instructions to provide the buildbox instructions.
For each step of the buildbox, provide clear instructions for how to assemble the final product. We strongly advise including pictures for each step and wherever applicable. You will also specify the amount of time to complete each step.
Before you start writing your instructions, make sure all of the product’s materials are in your inventory.
For this example product, it consists of the PCB, rubber button membrane, enclosure, screws, thumb screws, and batteries.
Each item for the final product needs to be listed in your product’s Bill of Materials. See the knowledge base article Creating Final Electronic Assemblies to find out more information about adding items to your product’s Bill of Materials.
Once you’ve made sure your materials are in product’s BOM, you’re now ready to start writing out the assembly instructions.
Begin by typing over the Tell us about how we should execute this step of the build process. The text editor allows you to choose the formatting you want to use for writing out your steps. We recommend using consistent formatting across each step to make them easier to follow.
Once you finish writing out the instructions for the step, set the timing you expect this step to take. For this example, the first involves installing two AAA batteries into the PCB’s battery holder. This step is expected to take about 10 seconds. When estimating timing, set up times or any other factors should not be considered. The only timing considered should be for how long it takes to complete that specific step.
Including bold notes in a step are a good way to include important reference instructions for assembly technicians to follow.
A great way to finalize a step is to upload a good picture of what the product should look like at this stage.
Once the step is complete, click save. You have a few options with what to do with the step from here:
It’s good to break up the assembly instructions into as many self contained steps as possible. As a good indicator for creating a new step, is when you introduce a new inventory item into the product.
For Step #2 of the example, we will be inserting the rubber button membrane into the enclosure. Manufacturing Part Numbers should be called out whenever introducing new inventory items using the SKU. This ensures that our assembly technicians use the correct parts for the step. The SKU is used in this example for the rubber button membrane with PDS-MEMBRANE-1.
The final steps of this product. Using captions are helpful when you have multiple images in a single step.
Steps 4-6 walk through the final steps to complete the product.
A picture of the final product should be included in the last step, so our assembly technicians have a good visual of what a complete unit should look like.
Once you’ve written your product’s required steps and time estimations, your product is now ready for review and feedback from a MacroFab engineer.